Ezurio BISM2 Guide de l'utilisateur télécharger pdf (Page 30)

7. Error Responses

All error responses from the EZURiO device will be in the form <cr,lf>ERROR nn<cr,lf>, where nn

will be a number in the range 00 to 99.

Error Description

01 Register not recognised

02 Value for register is out of range

03 Incoming call NOT pending

04 No call to connect to. This error code has meaning for ATO only

05 Syntax Error

06 Empty String

06 Device Class could not be stored

08 Invalid Device Class Code

09 Invalid Bluetooth Address

10 Could not set Service or Friendly name

11 PS Store Write

12 PS Store Read

13 Not Idle

14 Incorrect Mode

15 Already Scanning

16 Pairing is already in progress

17 Not USED

18 Not USED

19 Not USED

20 Not safe to write to Non-volatile Store - Ongoing Bluetooth Connection

21 Link Key Cache is Empty

22 Link Key Database is Full

23 Malloc returned NULL - Resource Issue

24 Remote Address same as Local Address

25 Connection Setup Fail, DSR Not asserted

26 Unauthenticated licence

27 Max Responses (See S Register 518) too high. Memory allocation error

28 The length of Pin in AT+BTK is too long

Invalid Ring count specified for S Register 0 or 100. If S0<>0 and S100<>0

then S0 must be < S100

30 ADC Error

31 Analogue Value cannot be read as it is set for output

32 Analogue Value cannot be written as it is set for input

33 S Register Value is invalid

34 Both L and R modifier cannot be specified in ATD command

35 Invalid Major Device Class – valid value in range 0x00 to 0x1F inclusive

36 Pairing in progress – Command cannot be actioned – try again later

Invalid Sniff parameter specified.

E.g. new Attempt value greater than MinInterval. Solution is to first increase

MinInterval and re-enter the Attempt value.

38 Get Remote Friendly name Failed

39 Failed to change mode to Multipoint

40 7 Bit mode requires parity to be even or odd

DSH_50003_v1v3 AT Command Reference 30 of 33

1 2 ... 25 26 27 28 29 30 31 32 33

Commentaires sur ces manuels

Pas de commentaire

Ezurio BISM2 Guide de l'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Ezurio BISM2