Ezurio BISM2 Guide de l'utilisateur télécharger pdf (Page 7)

Fax 1111

Audio Gateway 1112

WAP 1113

WAP_CLIENT 1114

2.2.6 ATD<U><Y><bd_addr>,<ServiceName> {Make Connection}

Make a connection to device with Bluetooth address <bd_addr> and profile specified via S

Reg 101 AND which has a service name starting with the string <ServiceName>. The

ServiceName parameter is a string delimited by “.

If <U> is not specified, then authentication is as per register 500, otherwise the

connection will be authenticated.

If <Y> is not specified, then encryption is as per register 501, otherwise the connection

will have encryption enabled.

The timeout is specified by S register 505.

Response: <cr,lf>CONNECT 123456789012<cr,lf>

Or <cr,lf>NO CARRIER<cr,lf>

2.2.7 ATD<U><Y>L {Remake Connection}

Make a connection with the same device and service as that specified in the most recent

ATD command. The <UY> modifiers are optional. An error will be returned if the ‘L’

modifier is specified AND a Bluetooth address.

If both ‘L’ and ‘R’ modifiers are specified then an error will be returned.

Response: <cr,lf>CONNECT 123456789012 AE<cr,lf>

Or <cr,lf>NO CARRIER<cr,lf>

2.2.8 ATD<U><Y>R {Make Connection to peer specified in AT+BTR}

Make a connection with the device address specified in the most recent AT+BTR command.

The service is as specified in S Register 101. The <UY> modifiers are optional. An error

will be returned if the ‘R’ modifier is specified AND a Bluetooth address.

If both ‘R’ and ‘L’ modifiers are specified then an error will be returned.

Response: <cr,lf>CONNECT 123456789012 AE<cr,lf>

Or <cr,lf>NO CARRIER<cr,lf>

2.2.9 ATEn {Enable/Disable Echo}

This command enables or disables the echo of characters to the screen. A valid parameter

value will be written to S Register 506.

E0 Disable echo.

E1 Enable echo.

All other values of n will generate an error.

Response: <cr,lf>OK<cr,lf>

Response: <cr,lf>ERROR nn<cr,lf>

2.2.10 ATH {Drop Connection}

Drop an existing connection or reject an incoming connection indicated by unsolicited RING

messages.

Response: <cr,lf>NO CARRIER<cr,lf>

DSH_50003_v1v3 AT Command Reference 7 of 33

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Pas de commentaire

Ezurio BISM2 Guide de l'utilisateur Page 7